ARALDITE Standard bonds anything to anything,Like metals, ceramic, marble, granite, most plastic/PVC, ivory, asbestos, glass, wood, leather rubber etc.Not suitable for plastics like silicon rubber.

Packing Size :

Description
About this item.
Araldite joints are water proof, heat proof, stress proof, and resistant to most chemicals. Non-corrosive and non-toxic.
Package Contains Araldite AW 106 Standard Epoxy Adhesive ( Resin 1kg + Hardener 800g ) 1.8kg x 1 Piece.
ARALDITE Standard bonds anything to anything like metals, ceramic, marble, granite, most plastic/PVC, ivory, asbestos, glass, wood, leather rubber etc. Not suitable for plastics like HDPE, PTFE and silicon rubber..
How to Apply: Clean both the surfaces to be bonded. Take equal quantities(by volume) of resin and hardener of Adralite Standard. Mix the resin and hardner until it forms a uniform colour. Apply a thin coat of the mixture on both the surfaces. Join the surfaces and apply pressure using tape, clamps or band. Remove the pressure after 6 -8 hours. Full strength is achieved in 24 hours.
Imported from India.
Araldite joints are water proof, heat proof, stress proof, and
resistant to most chemicals. Non-corrosive and non-toxic.

Package Contains

Araldite AW 106 Standard Epoxy Adhesive ( Resin 1kg + Hardener
800g ) 1.8kg x 1 Piece

This pack contains two tubes :

Features:

Worlds Strongest Bond
Versatile
No Shrinking after curing
Prevents sagging
Uses:

ARALDITE Standard bonds anything to anything like metals,
ceramic, marble, granite, most plastic/PVC, ivory, asbestos,
glass, wood, leather rubber etc. However it is not suitable for
plastics like HDPE, PTFE and silicon rubber.

How to Apply:

Clean both the surfaces to be bonded.
Take equal quantities(by volume) of resin and hardener of
Adralite Standard.
Mix the resin and hardner until it forms a uniform colour.
Apply a thin coat of the mixture on both the surfaces.
Join the surfaces and apply pressure using tape, clamps or band.
Remove the pressure after 6 -8 hours.
Full strength is achieved in 24 hours.

Resin and Hardener :

For best results :
Roughen, dry and degrees surfaces to be bonded.
Squeeze out equal amounts by volume, from both tubes.
Mix thoroughly.
Apply thin layer on both surfaces.
Clamp joint overnight as Araldite sets.
Araldite epoxy resins have the following outstanding properties :
Excellent adhesion to many different materials
Great strength, toughness and resilience
Excellent resistance to chemical attack and to moisture
Outstanding electrical insulating properties
Absence of volatiles on curing
Negligible shrinkage
Other epoxy resins for bonding, casting, tooling, pattern making,
surface coating, lamination and concrete repairs are available

Download TDS

Araldite Standard Epoxy Adhesive (Resin 1kg + Hardener 800g) 1.8kg

ARALDITE Standard bonds anything to anything,Like metals, ceramic, marble, granite, most plastic/PVC, ivory, asbestos, glass, wood, leather rubber etc.Not suitable for plastics like silicon rubber.

Related Products